The Rod Puller Hitch from SRECO-FLEXIBLE® is a heavy steel hitch that has a slotted and hardened socket to hold the rod coupling firmly while pulling a string of rods out of the pipe with a pulling vehicle.

The post Rod Puller Hitch appeared first on Shamrock.

The One Man Rod Turning Ratchet by SRECO-FLEXIBLE® is a combination of two rod turning ratchets in one tool. It enables the operator to take a “bite” while holding the tension that is already built up on the rods. For use in hand rodding operations.

The post One Man Rod Turning Ratchet appeared first on Shamrock.

The Rod Turning Ratchet by SRECO-FLEXIBLE® is an accessory used for hand rodding to turn the rods and tools. Two operators take alternate strokes with these ratchets. One holds tension on the rods, while the other takes another “bite”. The third operator simultaneously pushes the rods into the line.

The post Rod Turning Ratchet appeared first on Shamrock.

This SRECO-FLEXIBLE® tool is made for grooved couplings. As the locking dog slides in the groove, a slight rotation will engage it firmly into the coupling hole and hold the coupling securely while assembling the rod nuts.

The post Assembly Turning Handle appeared first on Shamrock.

The Pull-Out Turning Handle by SRECO-FLEXIBLE® can be used to push, pull or turn rods. When the locking pin is installed through the coupling hole, it is fastened to the rods securely.

The post Pull-Out Turning Handle appeared first on Shamrock.

The Pull-Out Tool by SRECO-FLEXIBLE® is used to slide on a rod, then down over the coupling to hand-push a string of rods into the line. Reverse the tool’s direction to hand-pull the rods from the line.

The post Pull-Out Tool appeared first on Shamrock.

The Bar Turning Handle is an excellent auxiliary tool from SRECO-FLEXIBLE® for light turning. One end of the turning handle slips through the center coupling hole and the other handle is screwed on for secure connection. Fits all rod coupling sizes.

The post Bar Turning Handle appeared first on Shamrock.

This SRECO-FLEXIBLE® wrench tool is for assembly and disassembly of rod nuts into and out of couplings. The tool’s hardened socket can be used on either the coarse-thread or fine-thread nut. The handle is designed to fit the center hole of the rod coupling.

The post Assembly Wrench appeared first on Shamrock.

The post Pilot Bullet Tool appeared first on Shamrock.

The post Spear Point Cutter appeared first on Shamrock.