carbide inserts » Shamrock

1/2″ Ultimate Penetrator

shamrocktools — Wed, 06 Dec 2017 17:49:50 +0000

The 1/2″ Ultimate Penetrator by Shamrock is the original penetrating nozzle which combines high flow and weight. Extra weight allows this nozzle to sit on the pipe bottom and clear settled obstructions, such as soap and grease deposits. It is used to create a center path for a flushing nozzle in severe buildup situations, saving water and time. it can be used in pipe sizes ranging from 2 to 8 inches.

Used in combination with our rotating nozzles, it will do 90% of the work necessary to restore proper flow to sanitary sewer lines.
This nozzle is equipped with replaceable carbide inserts for long service life eliminating the need to buy multiple nozzles in the future.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
1/2″ Ultimate Penetrator	2	10	5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
1/2″ Ultimate Penetrator	3 Rear Jets or 5 Rear Jets	10° Rear Jets	SC12

Product SKU Variations: 83-D/3, 83-D/5, 83-D SPCL, 83-D SPCL/3, 83-DGG, 83-DGG/3, 83-DHG, 83-DHG/3, 83-DIG, 83-DIG/3, 83-DJD, 83-DKG, 83-DKG/3

The post 1/2″ Ultimate Penetrator appeared first on Shamrock.

C17HH Nozzle Insert

shamrocktools — Tue, 29 Aug 2017 15:38:27 +0000

The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4″ NPT 9/16″ Internal Hex Carbide)

Insert Length: 2″

*Flow straightener is available for this insert.

Carbide Information:

Carbide for this insert is available in increments of 0.1mm
Carbide Range: 0.7mm to 3.6mm

The post C17HH Nozzle Insert appeared first on Shamrock.

C17 Nozzle Insert

shamrocktools — Tue, 29 Aug 2017 15:33:43 +0000

The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4″ NPT 9/16″ Internal Hex Carbide)

Insert Length: 0.93″

*Flow straightener is available for this insert.

Carbide Information:

Carbide for this insert is available in increments of 0.1mm
Carbide Range: 0.7mm to 3.6mm

The post C17 Nozzle Insert appeared first on Shamrock.

C11 Nozzle Insert

shamrocktools — Tue, 29 Aug 2017 15:25:58 +0000

The C11 nozzle insert is used in most Shamrock high pressure nozzles. (1/8″ NF 3/8″ Internal Hex Carbide)

Insert Length: 0.58″

*Flow straightener is available for this insert.

Carbide Information:

Carbide for this insert is available in increments of 0.1mm
Carbide Range: 0.7mm to 3.6mm

The post C11 Nozzle Insert appeared first on Shamrock.

C13 Nozzle Insert

shamrocktools — Tue, 29 Aug 2017 15:17:03 +0000

The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8″ NF 3/8″ Internal Hex Carbide)

Insert Length: 0.6″

*Flow straightener is available for this insert.

Carbide Information:

Carbide for this insert is available in increments of 0.1mm
Carbide Range: 0.7mm to 3.6mm

The post C13 Nozzle Insert appeared first on Shamrock.

SC12 Nozzle Insert

shamrocktools — Tue, 29 Aug 2017 14:49:32 +0000

The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4″ NF 1/8″ Internal Hex Carbide)

Insert Length: 0.4″

*Flow straightener is not available for this insert.

Carbide Information:

Carbide for this insert is available in increments of 0.1mm
Carbide Range: 0.6mm to 2.5mm
4mm Diameter x 6.5mm Long

The post SC12 Nozzle Insert appeared first on Shamrock.

3/4″, 1″ Radial C Nozzle

shamrocktools — Mon, 28 Aug 2017 18:56:58 +0000

The 3/4″, 1″ Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight rear replaceable carbide inserts. It can be used in pipe sizes ranging from 8 to 24 inches.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.25	1.25
1 NPT	2	3.25	1.25

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	8 Rear Jets	30° Rear Jets	SC12
1 NPT	8 Rear Jets	30° Rear Jets	SC12

The post 3/4″, 1″ Radial C Nozzle appeared first on Shamrock.

Rear Rotating Combi Blaster™

shamrocktools — Mon, 28 Aug 2017 17:32:14 +0000

The Rear Rotating Combi Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Two rear spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° while two impact at 90° to loosen sidewall buildup and debris.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 20° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Rear Spray, Rotating Jets, (2) 90° Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Rear Spray, Rotating Jets, (2) 90° Jets	C13

The post Rear Rotating Combi Blaster™ appeared first on Shamrock.

Forward Rotating Combi Blaster™

shamrocktools — Mon, 28 Aug 2017 17:20:41 +0000

The Forward Rotating Combi Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Two forward spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° while two impact at 90° to loosen sidewall buildup and debris.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 18° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Forward Spray, Rotating Jets, (2) 90° Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Forward Spray, Rotating Jets, (2) 90° Jets	C13

The post Forward Rotating Combi Blaster™ appeared first on Shamrock.

Forward Spray Rotating Blaster™

shamrocktools — Mon, 28 Aug 2017 16:41:10 +0000

The Forward Spray Rotating Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of TV, video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Four forward spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° to loosen and disintegrate residue ahead of the nozzle. Excellent for clearing a clogged or frozen pipe.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 18° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, 40° Forward Spray, Rotating Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, 40° Forward Spray, Rotating Jets	C13

The post Forward Spray Rotating Blaster™ appeared first on Shamrock.