C17HH Nozzle Insert
$39.00
The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4″ NPT 9/16″ Internal Hex Carbide)
The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4″ NPT 9/16″ Internal Hex Carbide)
Insert Length: 2″
*Flow straightener is available for this insert.
Carbide Information:
- Carbide for this insert is available in increments of 0.1mm
- Carbide Range: 0.7mm to 3.6mm
Related products
The 1/2" Ultimate Penetrator by Shamrock is the original penetrating nozzle which combines high flow and weight.
This product has multiple variants. The options may be chosen on the product page
The C11 nozzle insert is used in most Shamrock high pressure nozzles. (1/8" NF 3/8" Internal Hex Carbide)
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4" NPT 9/16" Internal Hex Carbide)
The 3/4", 1" Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight carbide jets.
This product has multiple variants. The options may be chosen on the product page
The Lance Tip nozzle insert provides extra penetration from four 15° water jets and one forward jet. (1/4" NF 7/16" Internal Hex)
The Forward Spray Rotating Blaster™ by Shamrock has four forward spraying, rotating water jets which impact the pipe wall at 40°.
This product has multiple variants. The options may be chosen on the product page
The Rear Rotating Combi Blaster™ by Shamrock has two rear spraying, rotating water jets which impact the pipe wall at 40° while two jets impact at 90° to loosen sidewall buildup and debris.
This product has multiple variants. The options may be chosen on the product page
The Rear Spray Rotating Blaster™ by Shamrock has four rear spraying, rotating water jets which impact the pipe wall at 40°
This product has multiple variants. The options may be chosen on the product page
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8" NF 3/8" Internal Hex Carbide)
The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/8" Internal Hex Carbide)
Reviews
There are no reviews yet