cleaning » Shamrock

1/2″ High Flow Cobia® Nozzle

shamrocktools — Wed, 06 Dec 2017 20:11:13 +0000

The 1/2″ High Flow Cobia® Nozzle from Shamrock is a multi-purpose nozzle used to clear sludge, mud and debris from the pipe bottom. It is machined from heat-treated alloy steel to offer corrosion resistance, low wear and high efficiency. Each water jet has a replaceable carbide insert which allows this nozzle to have a long service life.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
1/2″ High Flow Cobia® (6 Rear Jets)	2.75	4.875	3.3

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
1/2″ High Flow Cobia® (6 Rear Jets)	6 Rear Jets	20° Rear Jets	SC12

Product SKU Variations: 107HF-D SPCL, 107HF-DHG, 107HF-DIG

The post 1/2″ High Flow Cobia® Nozzle appeared first on Shamrock.

1/2″ Button Nozzle

shamrocktools — Wed, 06 Dec 2017 16:31:21 +0000

The 1/2″ Button Nozzle by Shamrock is a general purpose flushing nozzle designed for turns and bends in sanitary lines.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
1/2″ Button (30◦)	1.125	1.5	0.013

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
1/2″ Button (30◦)	3 to 10 Rear Jets	30° Rear Jets	None

Product SKU Variations: 21-2A, 21-2B, 21-2C, 21-2D, 21-2E, 21-2F, 21-2G, 21-2H, 21-2I, 21-2J, 21-2K, 21-2L, 21-2M, 21-2N, 21-2O, 21-2P, 21-2Q, 21-2R, 21-2S, 21-2T, 21-2U, 21-2V, 21-2W, 21-2X 21-2Y, 21-2Z, 21-2AA, 21-2BB, 21-2CC, 21-2DD 21-2EE, 21-2FF, 21-2GG, 21-2HH

The post 1/2″ Button Nozzle appeared first on Shamrock.

Flexicrome® Sectional Steel Rods

shamrocktools — Thu, 16 Nov 2017 21:37:14 +0000

Flexicrome® Sectional Steel Rods are premium quality rods from SRECO-FLEXIBLE® which are manufactured for extreme toughness, flexibility and long wear life. They have been used in sewers world-wide for more than 45 years. Each Flexicrome® Rod is made from high-tensile, spring steel which is induction tempered for uniformity. The included couplings are zinc plated and baked to prevent hydrogen embrittlement.

Sectional Rod Thickness	Diameter	Tensile Strength
5/16″	0.3165″	N/A
3/8″	0.3625″	N/A

Flexicrome® Sectional Steel Rods are available in many lengths. Each coupling provided with the rods is right hand x left hand (This provides tightening on the nuts as you are corkscrewing the rods in the sewer.)

The post Flexicrome® Sectional Steel Rods appeared first on Shamrock.

Blu-Steel® Sectional Steel Rods

shamrocktools — Thu, 31 Aug 2017 14:58:00 +0000

Blu-Steel® Sectional Steel Rods are premium quality rods from SRECO-FLEXIBLE® which are manufactured for extreme toughness, flexibility and long wear life. They have been used in sewers world-wide for more than 45 years. Each Blu-Steel® Rod is made from high-tensile, spring steel which is induction tempered for uniformity. The outer, blue-metallic coating is acid resistant and heat fused. The included couplings are zinc plated and baked to prevent hydrogen embrittlement.

Sectional Rod Thickness	Diameter	Tensile Strength
5/16″	0.3165″	230,000 – 245,000 psi
3/8″	0.3625″	230,000 – 245,000 psi

Blu-Steel® Sectional Steel Rods are available in many lengths. Each coupling provided with the rods is right hand x left hand (This provides tightening on the nuts as you are corkscrewing the rods in the sewer.)

The post Blu-Steel® Sectional Steel Rods appeared first on Shamrock.

3/4″, 1″ Radial C Nozzle

shamrocktools — Mon, 28 Aug 2017 18:56:58 +0000

The 3/4″, 1″ Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight rear replaceable carbide inserts. It can be used in pipe sizes ranging from 8 to 24 inches.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.25	1.25
1 NPT	2	3.25	1.25

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	8 Rear Jets	30° Rear Jets	SC12
1 NPT	8 Rear Jets	30° Rear Jets	SC12

The post 3/4″, 1″ Radial C Nozzle appeared first on Shamrock.

Rear Rotating Combi Blaster™

shamrocktools — Mon, 28 Aug 2017 17:32:14 +0000

The Rear Rotating Combi Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Two rear spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° while two impact at 90° to loosen sidewall buildup and debris.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 20° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Rear Spray, Rotating Jets, (2) 90° Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Rear Spray, Rotating Jets, (2) 90° Jets	C13

The post Rear Rotating Combi Blaster™ appeared first on Shamrock.

Forward Rotating Combi Blaster™

shamrocktools — Mon, 28 Aug 2017 17:20:41 +0000

The Forward Rotating Combi Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Two forward spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° while two impact at 90° to loosen sidewall buildup and debris.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 18° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Forward Spray, Rotating Jets, (2) 90° Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, (2) 40° Forward Spray, Rotating Jets, (2) 90° Jets	C13

The post Forward Rotating Combi Blaster™ appeared first on Shamrock.

Forward Spray Rotating Blaster™

shamrocktools — Mon, 28 Aug 2017 16:41:10 +0000

The Forward Spray Rotating Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of TV, video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Four forward spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40° to loosen and disintegrate residue ahead of the nozzle. Excellent for clearing a clogged or frozen pipe.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 18° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, 40° Forward Spray, Rotating Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, 40° Forward Spray, Rotating Jets	C13

The post Forward Spray Rotating Blaster™ appeared first on Shamrock.

Rear Spray Rotating Blaster™

shamrocktools — Mon, 28 Aug 2017 16:33:00 +0000

The Rear Spray Rotating Blaster by Shamrock is the ideal nozzle to eliminate residue from a sewer line, enhancing the use of TV, video and relining equipment. It has dual-action rear spray jets with flow straighteners which thrust the nozzle forward while flushing away loose debris. Four rear spraying rotating water jets are incorporated into the design of the nozzle and impact the pipe wall at 40°.

Features:

Self Rotating & Thrusting
Heat Treated Stainless Steel, polished and ground for maximum service life
Replaceable Carbide Inserts
Requires Minimal Maintenance
Fixed 18° Rear Thrust Jets advance the nozzle in a corkscrew motion through clogged pipe

*A skid is recommended for this nozzle.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4 NPT	2	3.5	2.5
1 NPT	2.75	4.5	5.5

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	18° Rear Thrust Jets, 40° Rear Spray, Rotating Jets	C13
1 NPT	4 Rear Thrust Jets, 4 Rotating Water Jets	118° Rear Thrust Jets, 40° Rear Spray, Rotating Jets	C13

The post Rear Spray Rotating Blaster™ appeared first on Shamrock.

3/4″, 1″, 1-1/4″ Radial Short Nozzle

shamrocktools — Thu, 24 Aug 2017 16:51:17 +0000

The 3/4″, 1″, 1-1/4″ Radial Short Nozzle by Shamrock is a flushing nozzle with wide angle rear jets used to clean sidewalls efficiently. It is manufactured from heat-treated, alloy steel. It can be used in pipe sizes ranging from 6 to 18 inches.

Dimensions & Weight:	Diameter (in.)	Length (in.)	Weight (lbs.)
3/4″ Radial Short (30◦)	1.5626	2	1
1″ Radial Short (30◦)	1.875	2.75	1
1-1/4″ Radial Short (30◦)	1.25	3.3125	1

Jet Information:	Number of Jets	Jet Angles	Carbide Inserts
3/4″ Radial Short (30◦)	5 Rear Jets	30° Rear Jets	None
1″ Radial Short (30◦)	6 or 10 Rear Jets (depends on gpm)	30° Rear Jets	None
1-1/4″ Radial Short (30◦)	10 Rear Jets	30° Rear Jets	None

Product SKU Variations: 30-E, 30-E SPCL, 30-ELC, 30-ELF, 30-ELF N/F, 30-EMD, 30-EMD N/F, 30-EME, 30-END N/F, 30-ENE, 30-ENF, 30-ENF N/F, 30-EPE, 30-EPF, 30-EPF N/F, 30-F, 30-F SPCL, 30-FOD, 30-FPF, 30-FPF N/F, 30-FRD, 30-FRD N/F, 30-FRE, 30-FSD N/F, 30-FSE N/F, 30-FUD, 30-FUD N/F, 30-FUE, 30-FUE N/F, 30-FQD, 30-FSD, 30-G, 30-G SPCL, 30-GUD, 30-GUD N/F, 30-GWD, 30-GYD

The post 3/4″, 1″, 1-1/4″ Radial Short Nozzle appeared first on Shamrock.