3/4″, 1″, 1-1/4″ Radial Short Nozzle
$99.00 – $154.00
The 3/4″, 1″, 1-1/4″ Radial Short Nozzle by Shamrock is a flushing nozzle with wide angle rear jets used to clean sidewalls efficiently.
The 3/4″, 1″, 1-1/4″ Radial Short Nozzle by Shamrock is a flushing nozzle with wide angle rear jets used to clean sidewalls efficiently. It is manufactured from heat-treated, alloy steel. It can be used in pipe sizes ranging from 6 to 18 inches.
| Dimensions & Weight: | Diameter (in.) | Length (in.) | Weight (lbs.) |
| 3/4″ Radial Short (30◦) | 1.5626 | 2 | 1 |
| 1″ Radial Short (30◦) | 1.875 | 2.75 | 1 |
| 1-1/4″ Radial Short (30◦) | 1.25 | 3.3125 | 1 |
| Jet Information: | Number of Jets | Jet Angles | Carbide Inserts |
| 3/4″ Radial Short (30◦) | 5 Rear Jets | 30° Rear Jets | None |
| 1″ Radial Short (30◦) | 6 or 10 Rear Jets (depends on gpm) | 30° Rear Jets | None |
| 1-1/4″ Radial Short (30◦) | 10 Rear Jets | 30° Rear Jets | None |
Product SKU Variations: 30-E, 30-E SPCL, 30-ELC, 30-ELF, 30-ELF N/F, 30-EMD, 30-EMD N/F, 30-EME, 30-END N/F, 30-ENE, 30-ENF, 30-ENF N/F, 30-EPE, 30-EPF, 30-EPF N/F, 30-F, 30-F SPCL, 30-FOD, 30-FPF, 30-FPF N/F, 30-FRD, 30-FRD N/F, 30-FRE, 30-FSD N/F, 30-FSE N/F, 30-FUD, 30-FUD N/F, 30-FUE, 30-FUE N/F, 30-FQD, 30-FSD, 30-G, 30-G SPCL, 30-GUD, 30-GUD N/F, 30-GWD, 30-GYD
Related products
The Rear Rotating Combi Blaster™ by Shamrock has two rear spraying, rotating water jets which impact the pipe wall at 40° while two jets impact at 90° to loosen sidewall buildup and debris.
This product has multiple variants. The options may be chosen on the product page
The 1/4" Penetrator Nozzle by Shamrock has a bullet style design for greater thrusts to push and penetrate blockages.
The 1" Boat Nozzle by Shamrock outperforms the competition when it comes to cleaning sand, silt and debris from waste water lines.
The 1/2" High Flow Cobia® Nozzle from Shamrock is a multi-purpose nozzle used to clear sludge, mud and debris from the pipe bottom.
The Lance Tip nozzle insert provides extra penetration from four 15° water jets and one forward jet. (1/4" NF 7/16" Internal Hex)
The 1" Tristar Chisel Nozzle by Shamrock is a great front penetrating nozzle for boring through blockages or blocked lines.
The 3/4", 1" Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight carbide jets.
This product has multiple variants. The options may be chosen on the product page
The Pulling Eye Bolt nozzle insert is available in 3/8" and 1/4" sizes and is used to pull a nozzle through the sewer line.
This product has multiple variants. The options may be chosen on the product page
This slow precision nozzle has internal dampening fluid to provide a controlled rotation.
This product has multiple variants. The options may be chosen on the product page
The SHAMROCK-ET® by Shamrock creates a path for large flushing nozzles or penetrates hair masses, root masses, hard grease, sand and gravel.
Reviews
There are no reviews yet