Showing 1–12 of 29 results

$90.00

The 1/2" Ellipse Penetrator Nozzle by Shamrock is a bullet style nozzle designed for greater thrust and penetrations through grease and hard soap.

$248.00

The 1/2" Grease Nozzle by Shamrock is a smooth, streamlined nozzle designed to penetrate and clear blockages. It is perfect for pipes with steeper grades.

$105.00

The 1/2" Ice Grease Penetrator Nozzle by Shamrock is a bullet style nozzle designed for greater thrust and penetration.

$490.00

The 1/2" Rotator Nozzle by Shamrock features a dual application design to effectively clean small sewer pipes (4-12") and P-traps as small as 4".

$264.00

The 3/4", 1" Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight carbide jets.

$99.00$154.00

The 3/4", 1", 1-1/4" Radial Short Nozzle by Shamrock is a flushing nozzle with wide angle rear jets used to clean sidewalls efficiently.

$60.00

The 3/8" Ice Grease Penetrator Nozzle by Shamrock is a bullet style nozzle designed for greater thrust and penetration.

$395.00

The Cable Rooter Kit by Shamrock scrapes the full pipe diameter to remove grease, roots and debris from cast iron and storm sewer pipes.

$4,425.00$4,700.00

The Chain Cutter 02 Kit by Shamrock is designed to scrape 8" to 18/20" pipe. It requires a pump capacity of at least 50 gpm @ 1500 psi.

$2,200.00

The Chain/Cable Cutter 050 from Shamrock is powered by a jetting machine and is designed to scrape the full pipe diameter. It removes grease, scale, and roots from the interior of collection lines. The minimum operating flow for this chain cutter using a ½” machine is 15 gpm. Using a ¾” machine, this cutter can handle a maximum flow up to 25 gpm.

$2,700.00

The Chain Cutter 1.5 Kit from Shamrock is powered by a jetting machine and is designed to scrape the full pipe diameter. It removes grease, scale, and roots from the interior of collection lines. The minimum operating flow for this chain cutter using a ¾” machine is 25 gpm. Using a 1” machine, this cutter can handle a maximum flow up to 90 gpm.

$539.00$1,100.00

The Forward Rotating Combi Blaster™ by Shamrock has two forward spraying, rotating water jets which impact the pipe wall at 40° while two other jets impact at 90° to loosen sidewall buildup and debris