No products in the cart.
Swage Tool Parts
Pull-Out Turning Handle
This SRECO-Flexible tool can be used to push, pull or turn rods.
This SRECO-Flexible tool is used to retrieve a string of rods which have broken off in the sewer.
Bar Turning Handle
This SRECO-Flexible wrench tool is for assembly and disassembly of rod nuts into and out of couplings.
Pilot Bullet Tool
This SRECO-Flexible tool is designed to thread through a sewer line that has heavy deposits which may restrict other cleaning tools from passing by.
Spear Point Cutter
This SRECO-Flexible tool is used as the first tool on stubborn stoppage.
Double Point Corkscrew
This SRECO-Flexible tool has two smooth, small sharply pointed prongs to snare root growth and other accumulated obstructions.
This tool is specifically designed by SRECO-Flexible to rotate above sand deposits in sewer and storm lines.
Square Bar Corkscrew
This is an effective first tool to use in an emergency stoppage situation. Due to its square stock design it is heavy-duty and durable.
Round Wire Corkscrew
Small, smooth and sharp-pointed, it can be used to screw into most material to open a small pipe blockage.
SRECO Flexible Nozzles
Un-Stopper Stainless Steel Penetrator Nozzle
The Un-Stopper is designed with a tip having varied orifices to provide flow to penetrate stoppages and dislodge the particles.
Aluminum Culvert Nozzle
The Aluminum Culvert Nozzle is designed to clean heavy material from large diameter pipes or culverts.
SRECO-FLEXIBLE is proud to present the next generation of sewage cleaning equipment, the Stallion series.
The SRECO-FLEXIBLE flat, spiral steel blade features cutting edges on both the front and back sides to cut in both directions.
SRECO-FLEXIBLE Concave Root Saw
The concave root saw from SRECO-FLEXIBLE is ideal for plastic pipes of all kinds.
The lower manhole rigid rod guide has been engineered and formed by SRECO-FLEXIBLE to provide accurate positioning of rods when entering the line.
Rod Guide Hose
The Rod Guide Hose is a SRECO-FLEXIBLE product
Blu-Steel® Sectional Steel Rods
The Blu-Steel® Sectional Steel Rods are premium quality rods from SRECO-FLEXIBLE which are manufactured for extreme toughness, flexibility and long wear life.
Chain Cutter 02 Kit
The Chain Cutter 02 Kit is designed to scrape 8-18/20" pipe. It requires a pump capacity of at least 50 GPM @ 1500 PSI.
Chain Cutter Skid
This catalog item is the skid for any Shamrock Chain Cutter .
Chain Cutter Chain
This catalog item comes as a set of three chains for any Shamrock Chain Cutter.
Chain Cutter 1.5 Kit
The Chain Cutter 1.5 Kit is designed to scrape 6-10" pipe. It requires a pump capacity of at least 25 GPM @ 1500 PSI.
Chain Cutter 050 Kit
The Chain Cutter 1.5 Kit is designed to scrape 3-6" pipe. It requires a pump capacity of at least 10 GPM @ 4000 PSI.
Chain Cutter Motor Assembly
This catalog item is the replaceable motor assembly for the Chain Cutter 050 Kit. It requires a pump capacity of at least 10 GPM @ 4000 PSI.
Cable Rooter Kit
The Cable Rooter by Shamrock scrapes full pipe diameter, removing grease, roots and debris from cast iron and storm sewer pipes.
Cable for Cable Rooter
This catalog item is replacement cable (set of 2) for the Cable Rooter. These allow you to scour the pipe prior to lining.
Stainless Steel Arbor
This catalog item is a replacement stainless steel arbor for the Cable Rooter.
Cutter Accessories & Blades
Spring Blade Style Cutter
The Spring Blade Style Cutter comes with three blades.
Spring Blade Chuck
This catalog item is a replacement chuck for the Blade Style Cutter.
Concave Saw Arbor
The concave saw arbor is for bolt-on saws and includes a hex cap screw, a cross bolt and a lock nut.
Water Jet Root Cutters
903 Small Pipe Root Cutter
The 903 Small Pipe Root Cutter is a water jet root cutter which cleans pipes 3-10".
Contractor Duty Skid
*This catalog item is just the skid for the Contractor Duty root cutter.
Shamrock Concave Root Saw Blade
The concave root saw blade is ideal for cutting obstructions in plastic pipe and offset pipe joints.
Contractor Duty Root Cutter
The Contractor Duty is a water jet root cutter which cleans pipes 6-18".
The Tiger Tail is a flexible hose guide assembly used in the manhole at the sewer pipe entrance.
Upper Manhole Roller
The Upper Manhole Roller is used over manholes, catch basins and other openings to allow movement of high pressure sewer hose into the line.
These pushers will fit all Shamrock Swage Tools.
Mechanical Swage Tool
The Mechanical Swage Tool comes complete with instructions, two sets of dies, one male end pusher, fitting lube and two wrenches.
Pulling Eye Bolt Nozzle Insert
The Pulling Eye Bolt nozzle insert is available in 3/8" and 1/4" sizes and is used to pull a nozzle through the sewer line.
Lance Tip Nozzle Insert
The Lance Tip nozzle insert provides extra penetration from four 15° water jets and one forward jet. (1/4" NF 7/16" Internal Hex)
C17HH Nozzle Insert
The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4" NPT 9/16" Internal Hex Carbide)
C17 Nozzle Insert
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4" NPT 9/16" Internal Hex Carbide)
C11 Nozzle Insert
The C11 nozzle insert is used in most Shamrock high pressure nozzles. (1/8" NF 3/8" Internal Hex Carbide)
C13 Nozzle Insert
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8" NF 3/8" Internal Hex Carbide)
C12 Nozzle Insert
The C12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/4" Internal Hex Carbide)
SC12 Nozzle Insert
The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/8" Internal Hex Carbide)
These dies will fit all Shamrock Swage Tools.
Hydraulic Swage Tool
Our classic Hydraulic Swage Tool is dynamically designed for easy repairs of high-pressure hose in the field.
Username or email address *
Lost your password?
Email address *
Subscribe to the Shamrock Newsletter