Nozzles, Tips/Advice
How to Order a Shamrock Nozzle
Sep
Although nozzles are named and grouped according to their most popular use, many have multiple applications. Ordering a variety of nozzles and associated tools will help you be ready to tackle any cleaning job. For those tough emergencies where you need a little extra assistance, you can contact us at (800) 633-7696. A product specialist will help you select the right tool for the job. (Always mention special conditions such as lateral line applications.)
- A front jet is standard on all Shamrock nozzles except the rotator nozzles. Many nozzles may be ordered without the front jet on request.
- Nozzles ordered for flow rates of 80 GPM or higher have 10 rear jets.
- All 1/2″ nozzles can be used on 1/2″ or 5/8″ hose.
Proper nozzle selection depends upon the hose size, flow rate and pressure of your pumping equipment. Some nozzles are available only in a certain size range to assure top efficiency and long service. Please use the table provided below to assist when ordering.
|
Identify the inside diameter of your hose. |
Match the hose diameter to your desired flow rate. | Identify the pressure of your pumping equipment. |
|
HOSE ID (in) |
FLOW RATES (GPM) |
PRESSURE (PSI) |
| A 1/8″ | A 3 | A 1000 |
| B 1/4″ | B 4 | B 1200 |
| C 3/8″ | C 5 | C 1450 |
| D 1/2″ | D 6 | D 2000 |
| E 3/4″ | E 8 | E 2500 |
| F 1″ | F 10 | F 3000 |
| G 1 1/4″ | G 12 | G 4000 |
| H 1 1/2″ | H 14 | SPCL Special Order |
| I 18 | ||
| J 20 | ||
| K 25 | ||
| L 30 | ||
| M 35 | ||
| N 40 | ||
| O 45 | ||
| P 50 | ||
| Q 55 | ||
| R 60 | ||
| S 65 | ||
| T 70 | ||
| U 80 | ||
| V 90 | ||
| W 100 | ||
| X 110 | ||
| Y 120 | ||
| Z 130 | ||
| AA 140 | ||
| AB 150 | ||
| SPCL Special Order |
