Although nozzles are named and grouped according to their most popular use, many have multiple applications. Ordering a variety of nozzles and associated tools will help you be ready to tackle any cleaning job. For those tough emergencies where you need a little extra assistance, you can contact us at (800) 633-7696. A product specialist will help you select the right tool for the job. (Always mention special conditions such as lateral line applications.)
- A front jet is standard on all Shamrock nozzles except the rotator nozzles. Many nozzles may be ordered without the front jet on request.
- Nozzles ordered for flow rates of 80 GPM or higher have 10 rear jets.
- All 1/2″ nozzles can be used on 1/2″ or 5/8″ hose.
Proper nozzle selection depends upon the hose size, flow rate and pressure of your pumping equipment. Some nozzles are available only in a certain size range to assure top efficiency and long service. Please use the table provided below to assist when ordering.
Identify the inside diameter of your hose.
|Match the hose diameter to your desired flow rate.||Identify the pressure of your pumping equipment.|
HOSE ID (in)
FLOW RATES (GPM)
|A 1/8″||A 3||A 1000|
|B 1/4″||B 4||B 1200|
|C 3/8″||C 5||C 1450|
|D 1/2″||D 6||D 2000|
|E 3/4″||E 8||E 2500|
|F 1″||F 10||F 3000|
|G 1 1/4″||G 12||G 4000|
|H 1 1/2″||H 14||SPCL Special Order|
|SPCL Special Order|