-
×
1" Cobia® Nozzle
2 × $770.00 -
×
C11 Nozzle Insert
1 × $28.00 -
×
1/2" Button Nozzle
2 × $88.00 -
×
3/4" Super Grenade Penetrator
1 × $248.00 -
×
1-1/4" Cobia® Nozzle
1 × $770.00
-
×
1/2" Grease Nozzle
1 × $248.00 -
×
1" Sand & Sludge Nozzle
1 × $319.00 -
×
1" Contractor Special
2 × $319.00 -
×
1-1/4" Boat Nozzle
1 × $2,420.00
-
×
1" Radial Vortex Nozzle
1 × $135.00
-
×
1" Tristar Chisel Nozzle
2 × $528.00 -
×
C17 Nozzle Insert
2 × $28.00 -
×
1" Un-Stopper Nozzle
1 × $286.00 -
×
3/4" Cobia® Nozzle
1 × $605.00 -
×
Lance Tip Nozzle Insert
2 × $39.00 -
×
1/2" High Flow Cobia® Nozzle
4 × $605.00 -
×
1/8" Short Nozzle
1 × $66.00 -
×
1/2" Ellipse Penetrator Nozzle
1 × $99.00 -
×
1-1/4" Little Shamrock™
2 × $935.00 -
×
1" Ultimate Penetrator
1 × $484.00 -
×
1" Super Grenade Penetrator
2 × $286.00 -
×
3/4" SHAMROCK-ET®
1 × $616.00 -
×
1" Tadpole® Nozzle
1 × $825.00 -
×
3/4" Tristar Chisel Nozzle
2 × $374.00 -
×
1" Boat Nozzle
2 × $2,420.00 -
×
1" 18◦ Grease Nozzle
1 × $264.00
C13 Nozzle Insert
$28.00
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8″ NF 3/8″ Internal Hex Carbide)
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8″ NF 3/8″ Internal Hex Carbide)
Insert Length: 0.6″
*Flow straightener is available for this insert.
Carbide Information:
- Carbide for this insert is available in increments of 0.1mm
- Carbide Range: 0.7mm to 3.6mm
1 review for C13 Nozzle Insert
Powered by
| 5 star | 100% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
Related products
$39.00
The Lance Tip nozzle insert provides extra penetration from four 15° water jets and one forward jet. (1/4" NF 7/16" Internal Hex)
$264.00
The 1/2" Ultimate Penetrator by Shamrock is the original penetrating nozzle which combines high flow and weight.
This product has multiple variants. The options may be chosen on the product page
Price range: $715.00 through $1,100.00
The Rear Spray Rotating Blaster™ by Shamrock has four rear spraying, rotating water jets which impact the pipe wall at 40°
This product has multiple variants. The options may be chosen on the product page
$39.00
The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4" NPT 9/16" Internal Hex Carbide)
$28.00
The C11 nozzle insert is used in most Shamrock high pressure nozzles. (1/8" NF 3/8" Internal Hex Carbide)
$25.00
The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/8" Internal Hex Carbide)
Price range: $715.00 through $1,100.00
The Rear Rotating Combi Blaster™ by Shamrock has two rear spraying, rotating water jets which impact the pipe wall at 40° while two jets impact at 90° to loosen sidewall buildup and debris.
This product has multiple variants. The options may be chosen on the product page
Price range: $715.00 through $1,100.00
The Forward Spray Rotating Blaster™ by Shamrock has four forward spraying, rotating water jets which impact the pipe wall at 40°.
This product has multiple variants. The options may be chosen on the product page
Price range: $8.00 through $13.00
The Pulling Eye Bolt nozzle insert is available in 3/8" and 1/4" sizes and is used to pull a nozzle through the sewer line.
This product has multiple variants. The options may be chosen on the product page
$28.00
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4" NPT 9/16" Internal Hex Carbide)
Sylvain Voisine (verified owner) –