-
×
3/4" Un-Stopper Nozzle
1 × $260.00 -
×
Lance Tip Nozzle Insert
2 × $39.00 -
×
SC12 Nozzle Insert
1 × $25.00 -
×
C17 Nozzle Insert
2 × $28.00 -
×
C11 Nozzle Insert
1 × $28.00 -
×
1/2" High Flow Cobia® Nozzle
1 × $605.00 -
×
1" Un-Stopper Nozzle
3 × $286.00
-
×
3/8" Penetrator Nozzle
1 × $66.00 -
×
1/2" Ice Grease Penetrator Nozzle
2 × $105.00 -
×
1/8" Short Nozzle
1 × $66.00 -
×
1" Boat Nozzle
1 × $2,420.00 -
×
1" Radial Vortex Nozzle
1 × $135.00
-
×
3/4" Sand & Sludge Nozzle
1 × $319.00 -
×
C17HH Nozzle Insert
1 × $39.00
C17 Nozzle Insert
$28.00
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4″ NPT 9/16″ Internal Hex Carbide)
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4″ NPT 9/16″ Internal Hex Carbide)
Insert Length: 0.93″
*Flow straightener is available for this insert.
Carbide Information:
- Carbide for this insert is available in increments of 0.1mm
- Carbide Range: 0.7mm to 3.6mm
Related products
$264.00
The 3/4", 1" Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight carbide jets.
This product has multiple variants. The options may be chosen on the product page
Price range: $539.00 through $1,100.00
The Forward Rotating Combi Blaster™ by Shamrock has two forward spraying, rotating water jets which impact the pipe wall at 40° while two other jets impact at 90° to loosen sidewall buildup and debris
This product has multiple variants. The options may be chosen on the product page
$39.00
The Lance Tip nozzle insert provides extra penetration from four 15° water jets and one forward jet. (1/4" NF 7/16" Internal Hex)
$39.00
The C17HH nozzle insert is used in nozzles for hydro excavating in industrial applications requiring a long, straight water jet. (1/4" NPT 9/16" Internal Hex Carbide)
$264.00
The 1/2" Ultimate Penetrator by Shamrock is the original penetrating nozzle which combines high flow and weight.
This product has multiple variants. The options may be chosen on the product page
Price range: $715.00 through $1,100.00
The Forward Spray Rotating Blaster™ by Shamrock has four forward spraying, rotating water jets which impact the pipe wall at 40°.
This product has multiple variants. The options may be chosen on the product page
$28.00
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8" NF 3/8" Internal Hex Carbide)
Price range: $715.00 through $1,100.00
The Rear Spray Rotating Blaster™ by Shamrock has four rear spraying, rotating water jets which impact the pipe wall at 40°
This product has multiple variants. The options may be chosen on the product page
Price range: $8.00 through $13.00
The Pulling Eye Bolt nozzle insert is available in 3/8" and 1/4" sizes and is used to pull a nozzle through the sewer line.
This product has multiple variants. The options may be chosen on the product page
$25.00
The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/8" Internal Hex Carbide)
Reviews
There are no reviews yet