No products in the cart.
C17 Nozzle Insert
$28.00
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4″ NPT 9/16″ Internal Hex Carbide)
The C17 nozzle insert is used in standard carwash guns for a 0° strong, straight water stream. (1/4″ NPT 9/16″ Internal Hex Carbide)
Insert Length: 0.93″
*Flow straightener is available for this insert.
Carbide Information:
- Carbide for this insert is available in increments of 0.1mm
- Carbide Range: 0.7mm to 3.6mm
Related products
$539.00 – $1,100.00
The Forward Rotating Combi Blaster™ by Shamrock has two forward spraying, rotating water jets which impact the pipe wall at 40° while two other jets impact at 90° to loosen sidewall buildup and debris
$715.00 – $1,100.00
The Forward Spray Rotating Blaster™ by Shamrock has four forward spraying, rotating water jets which impact the pipe wall at 40°.
$715.00 – $1,100.00
The Rear Rotating Combi Blaster™ by Shamrock has two rear spraying, rotating water jets which impact the pipe wall at 40° while two jets impact at 90° to loosen sidewall buildup and debris.
$264.00
The 1/2" Ultimate Penetrator by Shamrock is the original penetrating nozzle which combines high flow and weight.
$25.00
The SC12 nozzle insert is used in small nozzles and rotating blasters. (1/4" NF 1/8" Internal Hex Carbide)
$715.00 – $1,100.00
The Rear Spray Rotating Blaster™ by Shamrock has four rear spraying, rotating water jets which impact the pipe wall at 40°
$28.00
The C13 nozzle insert is used in most Shamrock standard inserted nozzles. (3/8" NF 3/8" Internal Hex Carbide)
$264.00
The 3/4", 1" Radial C Nozzle by Shamrock is a long lasting, hard impacting sewer nozzle. It is machined from heat treated alloy steel and has eight carbide jets.
$8.00 – $13.00
The Pulling Eye Bolt nozzle insert is available in 3/8" and 1/4" sizes and is used to pull a nozzle through the sewer line.
$28.00
The C11 nozzle insert is used in most Shamrock high pressure nozzles. (1/8" NF 3/8" Internal Hex Carbide)
Reviews
There are no reviews yet